The Mr Beam arrives fully assembled, calibrated, and ready to use. All you need for the first laser job is a computer and a pre-installed Google Chrome. Mr Beam is set up in three easy steps:
1. Unpack your Mr Beam
Set up your Mr Beam and your Mr Beam Air Filter (or Mr Beam Exhaust System). Mount the laser
Connect your Mr Beam with your computer.
Create and complete your first laser job!
The Mr Beam comes with a cardboard sample, the software contains a few graphic designs, so no extras are required for the first tryouts.
To cut your own artwork you’ll need a graphics program like Inkscape (free), Illustrator or Corel Draw to create SVG files. Engraving is even easier: While your SVG file would work as well, you could simply use any photo-file and engrave it on the chosen material. Check out our guide to choosing the write file format for laser cutting.
You will be able to access Mr Beam software app through your google Chrome browser, once you have set up a connection between your Mr Beam and your computer. If you don't have internet access, do not worry - you can use your Mr Beam offline!