Mr Beam II / Mr Beam II dreamcut / dreamcut [S] / dreamcut [x]
Components:
| Mr Beam | |
| W x D x H | 725 x 538 x 170 mm |
| Weight | 9,5 kg |
| Environmental temperature | 5°C -25°C |
| Humidity | 30% - 60% |
| Power consumption | 65 / 90 W (depending on equipment) |
| Connection type | Wi-Fi/Network cable |
| Software | Browser-based (Plug & Play) |
| Air Assist | dreamcut airflow (Factory installed, except Mr Beam II) |
| Workspace | 500 x 390 mm |
| Max. Object height | 38 mm (Standard), 68 mm (with Height Extension) |
| Laserclass | 1 (No laser safety officer and protective equipment necessary) |
| Air Filter System | |
| W x D x H | 270 x 270 x 270 mm |
| Weight | 5,6 kg |
| Maximum sound level | 56 dB (A) |
| Accessories | Pre-filter (mat or cartridge), main filter, Air Filter Controller if required |
| Laserkopf | |
| Laserquelle | Diode laser |
| Laser power | 10 W (Mr Beam II dreamcut [x]) 5 W (Mr Beam II / dreamcut / dreamcut [S]) |
| Focal point diameter | 0,15 mm |
| Wavelength | 450 nm (blue, visible light) |
| Engraving speed | 100 - 3000 mm/min |
| Cutting speed | 50 - 3000 mm/min |
Note: Technical data are subject to modification without notification.The data sheet as PDF and further information about the Mr Beam can be found here: