The speed is material dependent and ranges from ~60mm/min (cutting 3mm Kraftplex) to 1000mm/min (cutting 2mm felt). Engraving ranges from 100mm/min (anodized aluminum) to 2000mm/min (dark leather). Often it is better to have multiple passes with higher speed than going below 100mm/min to achieve nicer edges.
Created by: Anastasiia Zakordonets
Modified on: Wed, 18 Jul, 2018 at 7:47 PM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.