Hi,
if you encounter a camera error: Try moving the laser's gantry.
The camera error message is quite unspecific about the reasons for an error.
Sometimes, it just can't "see" the calibration circles (pink, in the corners) because these are below the gantry.
Cheers
Daniel
Daniel Barié
Hi,
if you encounter a camera error: Try moving the laser's gantry.
The camera error message is quite unspecific about the reasons for an error.
Sometimes, it just can't "see" the calibration circles (pink, in the corners) because these are below the gantry.
Cheers
Daniel