lasering a lot is getting annoying because of the fan. The speed goes up and down all the time for no clear reason.
Maybe you tell us something about the algorithm or add some lowpass for spin down cycle? This would also expand the lifetime.
Can you tell us the specs of the fan? I would like to add an adaptor to use a bigger fan.
I've reduced video resolution and increased volume. The second video is recorded mostly close to the fan.
If you need something else - just tell me.
I also attach screenshots of program versions
Can You Please Clear this Question Please Actually what you mean?
Which dan do you mean exactly? The fan in the laser head or the fan in the air ventilation unit?
The fan in the laser head is a BFB04512VHD fan from Delta Electronics (data sheet see here: https://www.mouser.de/datasheet/2/632/BFB45x45x20mm-519317.pdf).
The fan in the ventilation box is a Sunon PF40281BX-000U-S99 (data sheet see here: https://media.digikey.com/pdf/Data%20Sheets/Sunon%20PDFs/PF40281BX-000U-S99_Spec.pdf).
We would like to have a closer look at your issue. Could you please submit a ticket with a short video?
Thank you in advance.
I have the same issue as Martin with my Air Filter System, the fan often changes speed while a job is running.
For Example Cutting a circle in plywood, the fan speed goes up and down with no discernible reasons.
Regarding the camera jumping, it took me also as a shock in the beginning.
Now i understand if i have eg a dark material. and it is to bright in the room, the camera tries to adapt to the dark material.
Therefore the rings get to bright and the algorithm doesn't find it any longer.
So what i did is make the room darker (if possible) or just put a white sheet of paper also onto the material for setup.
Regarding fan, i have a similar problem, so loud that it really annoying (you can't be in the same room).
So if anyone of you have a solution ... would be great to hear.
Or just ... "hey this is normal"
Fan of the filter box changes speed and noise during jobs (not distracting me yet as I've not done so many jobs till now and furthermore taken as normal).
Camera delivers two different views from time to time (for no specific reason).
One view is in grey colour and allows accurate positioning of material (what you see it what you get), but another, more colourful and from more above view can't be used to position materials (laser cuts about 10mm away from where you wanted).
The ventilation box fan. Thank you very much!
Hi, I build a bigger fan mount which carrys a San Ace fan (9GA0912P4G03).
This works perfect. You can find the files on my github https://github.com/msommerx/MrBeamStuff/tree/master/Better%20Fan
You can connect a HT pipe (100 mm) as an exhaust.
Can we ask you to also send us a ticket with a video, so we can check this in more detail?