Start a new topic



lasering a lot is getting annoying because of the fan. The speed goes up and down all the time for no clear reason.

Maybe you tell us something about the algorithm or add some lowpass for spin down cycle? This would also expand the lifetime.

Can you tell us the specs of the fan? I would like to add an adaptor to use a bigger fan.



1 person has this question

Hello Forum

Here is the link to our solution of the fan problem.

Best regards,


Hello Forum

We found a good and ................sorry Martin...............professional solution to this problem.

Please stay patient for another few days - it will be worth it :-)


Yes, I cut the wires and used the RJ connector.

1 person likes this
Did you wire it to the RJ45 jack at the rear?




Hi, I build a bigger fan mount which carrys a San Ace fan (9GA0912P4G03).

This works perfect. You can find the files on my github

You can connect a HT pipe (100 mm) as an exhaust.


Has anyone already figured out fan control? To me, it seems like a standard RJ45 connector that leads to the air filter. Probably one would have to modify the air filter box at the bottom. There are not that many holes. So just adding a bigger fan won't help.

Can You Please Clear this Question Please Actually what you mean? 

RS Pro 34b36546(Date sheet)

Hi. I have same issue. I thougt this is normal, but when i see that so many people think that is not right, then i will suport you. Can not see any replay from suport team regarding this issue.


Regarding the camera jumping, it took me also as a shock in the beginning.
Now i understand if i have eg a dark material. and it is to bright in the room, the camera tries to adapt to the dark material.

Therefore the rings get to bright and the algorithm doesn't find it any longer.

So what i did is make the room darker (if possible) or just put a white sheet of paper also onto the material for setup.

Regarding fan, i have a similar problem, so loud that it really annoying (you can't be in the same room).

So if anyone of you have a solution ... would be great to hear.

Or just ... "hey this is normal"

Hi Manuel, See the Camera View Thread for the two views. If you cover the red rings, your Mr. Beam has no calibration markers. Martin

2 people like this

Same here.

Fan of the filter box changes speed and noise during jobs (not distracting me yet as I've not done so many jobs till now and furthermore taken as normal).

Camera delivers two different views from time to time (for no specific reason).

One view is in grey colour and allows accurate positioning of material (what you see it what you get), but another, more colourful and from more above view can't be used to position materials (laser cuts about 10mm away from where you wanted).


I remember bragging about the quietness of the Mr Beam when used with the air filter. ”Quiet as much if not less than a laser printer”, or something like that. While is not as noisy as a high-end laser cutter, it is indeed loud, and that noise (the speed of the fan, that is) changes during the job. I won't share any video: other did it, and anyway, I'm still waiting for the other two tickets I've opened to be handled, starting from the fact that the camera is wholly misaligned making impossible to do any experiment.

2 people like this

I have the same issue.

The fan of the filter box is howling distinctly. 

Mr. Beam itself is pretty quiet.

I've reduced video resolution and increased volume. The second video is recorded mostly close to the fan. 

If you need something else - just tell me. 

I also attach screenshots of program versions

(6.26 MB)
(8.69 MB)
Login or Signup to post a comment